Wood Hammer Mill
Brief Introduction of Wood Hammer Mill
Wood Hammer Mill can grind all kinds of materials of pellet feed, such as corn, sorghum, grain, legumes, broken cake pellet and others.
Building in rotor, grind the raw material with no dead angle, finished products would be more even.
Operate door can be moved fully, it is easy to be operated.
In-built sealed avoid dust spill out, keep the working environment tidy and clean.
It may carry on the ordinary grinding, also may carry on the thin grinding and the micro grinding. Thus it has been widely used in the raw material grinding of the large and medium scale feed factory, alcohol plant, lemon factory, food products factory and so on.
working principle of Wood Hammer Mill
Material went into the crushing chamber through the hopper, then it was crushed by the high speed rotation of the hammer. Under the effect of centrifugal force, the broken material along the outer edge of the rotor, by continuously hammer, tooth plate, sieve extrusion, collision, blow, rub and was crushed quickly.Crushed powder was sent out of the crushing chamber through the centrifugal force of the rotor and the fan suction force.
But the unbroken materials will repeat the above process until it was crushed and sent out of the crushing room.
Features of multifunctional wood hammer mill:
1. High quantity,low energy consumption,low noise,few dust.
2. Box body is precision machined composite structure by heavy-gauge sheeting. .rotating shaft with wide-angle six corner post is strong force.feeding hopper is heavy calibre and strong,so you are at ease to put into larger raw material.
3. It is special rotary blades,strong blade load,sharp cutting edge in thickness,shape,marshalling sequence.it can crush with high efficiency.
4. Adopt PLC control button,it has start,stop,reversal and automatic reversal control function,safety operation no risk at all.
5. Blades is produced by special tool steel,they are sturdy and durable.
6. Box body can resistance to high torque.
7. Easy to adjust,low manintence charge,ecnomy and durability.
Specification of Wood Hammer Mill:
Model |
Power(kw) |
Output (t/h) |
Weight (t) |
SG40 |
7.5 |
0.2-0.5 |
0.27 |
SG50 |
15 |
0.6-0.8 |
0.45 |
SG65x27 |
22 |
0.8-1.5 |
1.1 |
SG65x55 |
37-45 |
1-2 |
1.5 |
SG65x75 |
55-75 |
2-3 |
1.9 |
SG65x100 |
90-110 |
3-4 |
2.3 |
SG130x55 |
110-160 |
5-6 |
5.3 |
SG130x100 |
160-220 |
7-8 |
6.8 |
